Well the good news is that I got the data through both Pushover and IFTTT
Thank you for testing this out.
I have only send the crash logs through Android’s crash report service that appears after the crash. There’s usually no ticket created. I will report it directly to Pebble later today.
I’ve reported this to Pebble too. Hopefully this will result in some enlightenment.
Can I ask some kind Android owner to try the Morpheuz40-11.pbw (from the Dropbox share above)? As a minimum load it, make sure the settings page works, hit bed time on the menu, then stop & quit, restart Morpheuz and pick resend from the menu. Wait a couple of minutes and job is done.
I tried it but I ran into the Pebble Time app crash issue.James Fowler said:Can I ask some kind Android owner to try the Morpheuz40-11.pbw (from the Dropbox share above)? As a minimum load it, make sure the settings page works, hit bed time on the menu, then stop & quit, restart Morpheuz and pick resend from the menu. Wait a couple of minutes and job is done.
Is there a way to have Morpheuz track my sleep without setting a wake-up alarm?
Yes. In the menu leave alarm on/off unchecked. You also will get no alarm symbol in the status bar and the time range will show just the date.
Thank you James! Do I still begin my sleep session the same way?
Yep. absolutely. I had a nice lay-in this morning.
So I got a response from Pebble on the crash report sent through Android's built-in reporting function. They recommended to perform factory reset on the PTS and start with a fresh install on the phone. That's too much work and I'm not convinced it'll fix the problem. So I'm therefore not going to do it.Stefan Baeurle said:I have only send the crash logs through Android's crash report service that appears after the crash. There's usually no ticket created. I will report it directly to Pebble later today.
The response to the direct bug report with Pebble is still outstanding.
I’m not convinced either. I’m going to try and collect as much information as possible. If they have something tangible to investigate then progress could be made.
I’m facing a problem with the Hue Light implementation of the app.
It seems to repeatedly brighten the light to maximum forever. So when I dim the lights down or turn them off completly, they will be turned on again and again after a few seconds until I kill the app on my iPhone.
Any clues, what I’m doing wrong here?
I’ve read some info on the Morpheuz website on interpreting the sleep graph chart but it doefsn’t explain the peaks & valleys on the chart. What to the high peaks & low valleys on the graph chart mean and how do I reconcile that with the pie chart information?
It’s amount of movement. So high is more movement (restless sleep) while lower is less movement (deep)
I was thinking about the graph today, the one that appears on the very bottom of the watch screen. Would it be possible to add an option to make this larger? So it’s more visible and easier to read. Can get a quick analysis before checking on phone for details later
Totally agree with @Josh Smith’s request. I realize the watch face is way small to show much detail but if you could add an additional option to view the graph within the scrolling menu it could work for a quick peek. smile
#Morpheuz: Nexus Problems - an update - http://www.morpheuz.net/2016/02/nexus-problems.html
Hi James, I have an issue with version 4. I have set up the smart alarm for 5:55 - 6:20. On weekend, I switch off the alarm. Today I stopped the monitoring at 7:15, but the end time is anyway 5:55. I see that the monitoring continues, but the result is counting just till 5:55. Some idea? Thanks, Tibor.
Update on Monday: I tried to reinstall the app to be sure that I am on the latest version. Now there is a small difference, I stopped the monitoring at 6:00, but the result covers the monitoring only till 5:11. The graph goes till 6:00 thought.